An Interactive 5-Day Training Course
Basic Drilling Technology
Course Overview
In order to ascertain whether a structure contains oil or gas, a well has to be drilled through it. One can get important information from the well, such as drill cuttings, cores and different logs.
From these data one can ascertain whether there is oil or gas in the well, and further information about the quality of the reservoir, If the results are promising, one or more zones in the well are sometimes tested - either with a wireline formation tester - so-called mini test - or a drill- stem test (DST). If the results of the test are good, more appraisal wells are drilled to map the extent of the field.
Primarily in this Basic Drilling Technology training course we emphasize the modern ways of drilling in a cost-effective approach while we explain how the field is thoroughly evaluated. This includes estimating the volume of hydro - carbons in the field, consideration of drive mechanism and the expected formation pressures. This forms the basis for the field development plan. Cash flow, capital and operating expenditure for the field are estimated following the drilling sequence and the production tests, so that the profitability can be considered. If the economic evaluation of the field seems positive, it is deemed commercially viable and can therefore be developed.
This Basic Drilling Technology training course will clarify in-depth the drilling of Exploration wells. Also we meet other terms for these wells like Wildcat, Appraisal wells, Development wells or production wells. During the training course the drilling rigs will be presented together with full description of basic components of the rig.
The GLOMACS Basic Drilling Technology training course will feature:
- Introduction to special drilling for highly deviated wells or horizontal ones and the practical means and tools to achieve these demanding works.
- Estimated TD, production potential.
- Geological prognosis considerations prior to start drilling activities
- Casing and cementing design
- Coring and open hole logging
Training Outline
DAY 1: Pre Drilling Considerations
- Reservoir Considerations
- Work program
- Permission to Drilling
- Cost and time estimate
- AFE Approval
- Rig Selection according to type of the well and estimated TD
- Description of rig components
- Provision of materials
- DST considerations and or completion requirement
- Pad preparation for rig reception.
- Offshore cases
DAY 2: Drilling Design
- Pore pressure calculations
- Geological prognosis
- Drilling Fluids program
- Casing and cementing design
- Coring services
- Open hole logging per section drilled
- Personnel and supervision
DAY 3: Actual Drilling Operation
- Drilling monitoring
- Minimum Drilling Parameters required
- Bits selection
- Drilling problems
- Technical accidents
- Circulation losses
- Pipe stuck
- Fishing operations
- Cement plug around lost in hole pipes
- Kicking over fish and continuation of drilling
- LOT and FIT tests
- Secure section drilled by running casing prematurely and cement in place
DAY 4: Well Control Procedures
- BOP stuck
- Kick problems
- Well Killing operations and methods
- Flow checks and pore pressure estimation
- Cement plugs
- Contingency plan and deviation from original program
- Amendment program for drilling continuation
- Liner running procedures
- Well testing, DST and evaluation of pay zone. Completion preparations if development well
DAY 5: Special Drilling Applications
- Highly deviated wells
- Horizontal wells
- Logging while drilling (MWD), (LWD)
- Under balance drilling
- Drilling with air
- Drilling with foam
- Drilling Reports
- Mud logging services when necessary
- Suspension of the well till completion
- Final abandonment if the well is dry
- Rig release
- Final report. Post drilling summary
- Economics and comparison versus estimated ones
Certificates
- On successful completion of this training course, GLOMACS Certificate will be awarded to the delegates
- Continuing Professional Education credits (CPE) : In accordance with the standards of the National Registry of CPE Sponsor, one CPE credit is granted per 50 minutes of attendance
Accreditation
GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.
All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.
Providers and Associations
About Saudi Glomacs
At Saudi GLOMACS, we specialize in delivering world-class training courses in Saudi Arabia and across various international locations. Our training courses are tailored to meet the unique demands of Saudi Vision 2030 and the Human Capability Development Program, focusing on empowering Saudi citizens and enhancing workforce skills. We offer diverse courses spanning leadership, management, engineering, and technical disciplines to cultivate expertise and drive professional growth. Our flexible learning options—whether in-person, online, or in-house—ensure accessibility and convenience for individuals and organizations alike.
With over 30+ years of experience through the GLOMACS global network, we are committed to delivering innovative, results-driven training solutions. Our expert instructors combine industry knowledge with dynamic teaching methods, fostering practical skill development and long-term career success. By choosing Saudi GLOMACS, you're investing in personal excellence and contributing to the Kingdom’s sustainable economic growth and vision-driven transformation.
What do you need to learn next?
Check our list of courses or let us customize a course for you.
View courses
