An Interactive 5-Day Training Course
Offshore Engineering
Design, Fabrication, Installation, Hook-up and Commissioning
Course Overview
The Oil and Gas industry have offshore design engineering and construction projects as well as maintenance services which are technically and commercially challenging therefore good knowledge and competency of the project team members throughout the different phases of works are keys to the successful execution of these projects. This training seminar aims to provide the participants with comprehensive foundation knowledge of Offshore Engineering.
This GLOMACS Offshore Engineering training seminar starts with an introduction of Field Development Planning (FDP) and Project Management, followed by design engineering, procurement, substructures and topsides fabrication, load-out and sea transportation, offshore installation, hook-up, commissioning, and start-up. An overview of the major and support marine vessels, cranes and pipe-laying equipment will also be described. This GLOMACS training seminar places particular emphasis on the principles and steps of the works, using engineering calculations, flowcharts and diagrams to enhance the learning experience of the participants. Relevant international and typical client engineering standards will be referred to. Rules of thumb, engineering formulas, flowcharts and diagrams will be used to illustrate the principles and steps required for each part of the work. Real-life project examples as well as video clips will be used to demonstrate these offshore engineering activities and to aid the familiarisation and learning of the participants.
With a good foundation knowledge of offshore engineering, it is hoped that the participants will be better prepared to function in the design engineering, fabrication and construction department, offshore installation, hook-up, commissioning and start-up of offshore projects. Such roles include field and discipline engineers, project engineer, cost estimating engineers, fabrication contract admin executives, CSR, construction supervisors and engineers, or fabrication engineer. This GLOMACS Offshore Engineering training seminar will also be useful for university lecturers who wish to supplement their teaching materials and theoretical knowledge with real-life domain or practical knowledge of offshore engineering competencies and skills in pursuit of their CPD certification with Institution of Engineers at their respective countries.
This GLOMACS training seminar will feature:
- Overview of field development planning (FDP) and project management
- Design engineering process, deliverables and flowchart
- Fabrication techniques such as cutting and welding, blasting and painting
- Erection and assembly techniques, including cranes and lifting techniques
- Load-out techniques, preparations and ballasting
- Sea-fastening engineering and implementation
- Major and support marine vessels, major installation equipment
- Structure and topsides installation techniques
- Pipelaying and riser installation activities
- Subsea installation and diving support activities
- Hook-up workpack process and execution
- Mobilisation of marine vessels, construction crew, marine crew and construction equipment
- Hook-up activities for each engineering discipline
- Commissioning activities, start-up and handover to client
Training Outline
DAY 1: Field Development (FDP), Project Management and Design Engineering
- Pre-course Assessment Test
- Course Learning Objectives vs. Course Participants’ Expectations
- Overview of Field Development Planning (FDP)
- Project Management Team (PMT), Roles and Responsibilities
- Contracting, Subcontracting and Procurement Activities
- Design Engineering Process, Deliverables and Flowchart
- Health, Safety, Environment and Security Requirements, including training requirements and qualifications of personnel
- Emergency Response Procedure (ERP)
- QAQC Requirements, Documentation and Drawings Controls
DAY 2: Fabrication and Onshore Construction
- Fabrication Yard Layout, Load-out Methods, Workshops and Major Equipment Types, Foundation Preparation and Preliminary Works
- Planning and Schedule, Fabrication Cost-Time-Resource (CTR) Estimating
- Fabrication, Erection and Assembly of Major Structures, Substructures: Topsides and Living Quarters
- Pipeline Procurement, Concrete Coatings, Pipeline Load-out and Transportation
- Welding and Welder Qualifications
- Blasting and Painting Activities: Testing and Inspection Requirements
- Typical Manpower and Fabrication Equipment Planning and Management
- Skid and Packaged Equipment Procurement, Factory Acceptance Testing (FAT), Delivery, Storage and Preservation and Installation
- Weight Control and Weighing of Structures in Fabrication
- Yard Pre-commissioning Activities
- Jacket Commissioning, Trial Fitting and Ship Loose Items Management
- Pile and Conductors Make-up and Fabrication, Transportation Arrangement Consideration and Load-out
- Load-out Planning, Engineering for Substructures and Topside; and Load-out Execution, Ballasting Techniques and Calculation
- Insurances, Commercial and Warranty Surveys
DAY 3: Offshore Facilities, Pipelaying and Subsea Installation I
- Offshore Transportation and Installation Phases, including Planning and Scheduling
- Major and Support Marine Vessels, Major Equipment Types
- Offshore Installation Considerations, Engineering and Calculations
- Weight Control and Onshore Weighing Reports of Structures
- Transportation Analysis and Sea-fastening
- Launching, Lifting and Installation of Substructures
- Upending of Substructures
- On-bottom Stability, Pile and Conductor Make-up, Piling and Grouting of Substructures
- Lifting Analysis of Topsides and Modular Topsides Construction
- Float Over of Integrated Topside Deck
- Geotechnical and Geomatics Surveys
- Anchor-pattern Preparation and Approval
DAY 4: Offshore Facilities, Pipelaying and Subsea Installation II
- Vessels Availability, Contracting and Procurement Activities and Considerations
- Cost-Time-Resource (CTR) estimating for Transportation and Installation
- IPOP and Pre-execution Reviews
- Mobilisation Preparations
- Insurances, Commercial and Warranty Surveys
- Metocean Activities and Installation Window Considerations
- Substructures Installation - launching, lifting, self installation & novel methods
- Topsides Installation - modular lifts, float-over and novel methods
- SIMOPS Considerations for Offshore Installations
- Pipeline and Riser Installation
- Reel Pipelines and Umbilicals Laying
- Subsea Equipment Installation and Diving Support Activities
- Insurances, Commercial and Warranty Surveys
DAY 5: Hook-up Construction and Commissioning (HuCC)
- HuCC Project Planning and Scheduling, Monitoring and Reporting
- Workpack Process and Execution
- Procurement - cost-plus and overheads
- Construction and Marine Crew Manpower Recruitment and Mobilisation
- Onshore Minor Fabrication
- Mobilisation of Major and Support Marine Vessels
- Overview of Marine Operations
- Onshore Supply Base and Load-out Activities
- Logistics Support Activities
- Hook-up Activities, namely blasting and painting, cutting, fitting and welding, piping and piping supports, platform appurtenances, electrical and instrumentation works
- Pre-commissioning Activities, Hydrotesting, NDT and Inspection
- Commissioning Activities and Dossiers
- Start-up (first oil, first gas), Hand-over and Punch-list Items
- Post-project Activities, Final Documentation, Change-order and Variation Orders, Lesson Learnt Database and Dissemination
- Course Summary
- Post-course Assessment Test
Certificates
- On successful completion of this training course, GLOMACS Certificate will be awarded to the delegates
- Continuing Professional Education credits (CPE) : In accordance with the standards of the National Registry of CPE Sponsor, one CPE credit is granted per 50 minutes of attendance
Accreditation
GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.
All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.
Providers and Associations
About Saudi Glomacs
At Saudi GLOMACS, we specialize in delivering world-class training courses in Saudi Arabia and across various international locations. Our training courses are tailored to meet the unique demands of Saudi Vision 2030 and the Human Capability Development Program, focusing on empowering Saudi citizens and enhancing workforce skills. We offer diverse courses spanning leadership, management, engineering, and technical disciplines to cultivate expertise and drive professional growth. Our flexible learning options—whether in-person, online, or in-house—ensure accessibility and convenience for individuals and organizations alike.
With over 30+ years of experience through the GLOMACS global network, we are committed to delivering innovative, results-driven training solutions. Our expert instructors combine industry knowledge with dynamic teaching methods, fostering practical skill development and long-term career success. By choosing Saudi GLOMACS, you're investing in personal excellence and contributing to the Kingdom’s sustainable economic growth and vision-driven transformation.
What do you need to learn next?
Check our list of courses or let us customize a course for you.
View courses
